1971$29,000

Oldsmobile Cutlass

October 01, 2018 @ 4:42 am web source 3,370 views 10 pictures Windham, NH
 1971 Olds Cutlass 1971 Olds Cutlass 1971 Olds Cutlass 1971 Olds Cutlass 1971 Olds Cutlass 1971 Olds Cutlass 1971 Olds Cutlass 1971 Olds Cutlass 1971 Olds Cutlass 1971 Olds Cutlass
2
0
We’re sorry but while this car may still be available, this ad had expired.

This rare, ultra low mileage, truly turn-key muscle car is one of the nicest generation ('68-'72) Cutlass resto-mods you'll find for sale anywhere.

Here's the Full Scoop with all the info a serious buyer would want to know:

First off, this is a very rare "post coupe" model. According to Oldsmobile, only 6.8% (4339 of the 63,145) 1971 Cutlass S V8 cars were post coupes. So limited in production, everyone who knows these Oldsmobile's asks me how I found one.

The first owner of this Cutlass had it from new in '71 until '95. That second owner purchased it with only 44,00 original miles and had it from '95 until I purchased in April 2003.

The second owner had the body totally redone with new fenders and quarter panels and a very high quality, absolutely gorgeous "Maui Blue" paint job in 2000. Aside from a few very minor blemishes (only visible under close examination) the paint still looks like new today.

View walk around video with this link > https://youtu.be/0fW0cSx_xpc

Once the body restoration was complete, the second owner won trophies at classic car shows all over New England.

I purchased the Cutlass in April 2003 with an authenticated 58,000 miles on it. At that time, it had the original 350 Rocket motor, 2bbl carb and 3 spd A/T on the column. The interior was 100% original right down to the original seat belts (still in place).

I kept it just like that until 2008 when I found (after a very long search) an original Olds 455 "F" block (OE in 1970-72) and decided it was time to take the car to the next level.. and beyond. From there, no expense was spared in making this the one-of-a-kind, resto-mod street machine it is today.

Starting with the engine build, the entire drive-train (engine-transmission-rear) was considerably upgraded.

The engine was built by the high-performance pro's at Golen Engine Service very close to the specs of a Car Craft magazine 455 build. That engine made 469 horsepower and 565 torque with a smaller XE274H cam. This engine, with the same Edelbrock aluminum heads but next level XE284H cam, is estimated at 480 horse with 550 torque. One hell of a motor with more raw horsepower than Oldsmobile (or anyone else) produced from the factory back in 1971!

Key Specs:

Edelbrock Performer RPM Aluminum Cylinder Heads
Speed Pro Forged Pistons - 10.25:1 Compression
Eagle H-Beam Connecting Rods with ARP Performance Rod Bolts
Comp Cams Xtreme Energy 284H Cam - .541" Intake / .544" E Lift
Comp Cams Full Roller Rocker Arms w/ 7/16" Screw-in Studs & Guide Plates
Edelbrock Torker Polished Intake Manifold
Holley 770 CFM Ultra Avenger Polished Carb
DUI Performance HEI Distributor & Live Wire Set

Very street-able engine provides best of both worlds.. purrs at cruising speeds and makes BIG power (at higher RPM) when you put your foot into it!

There is literally nothing under the hood that wasn't upgraded, including Desert Cooler radiator, high-performance starter and aluminum pulley set.

Aligned with the new engine, the transmission also received a high-performance upgrade replacement with an Art Carr 200-4R Extreme Duty 4-Speed (Overdrive) Automatic w/ 10" Heavy-Duty Super Torque Converter.

The original 10 bolt non-posi rear (now in my garage) was upgraded to a 12 Bolt unit completely rebuilt w/ Eaton Posi and 3.55 Ratio Gears.

Exhaust now flows rather awesomely through ceramic coated Hooker Super Competition 1 7/8" Headers into a complete stainless steel MagnaFlow Performance 3" Dual w/ Tru-X Pipe.

The interior received a new OE carpet but otherwise the dash, door panels, rear seat and headliner are original and, except for minor wear on the driver's side arm rest, are in excellent condition. The factory bench front seat is upgraded to Pro-Car Custom Bucket Seats split by a floor mounted Hurst Pro-Matic Shifter made for the 4 speed overdrive transmission.

A Flaming River Polished Tilt Steering Column w/ Olds Walnut Wood Steering Wheel replaces the factory non-tilt unit. The ignition was relocated from the steering column to where the cigarette lighter was in the dash. Very trick.

The non-tach factory gauges have been upgraded to a show quality Rally Pack & Tach setup as was factory equipped on 1970-72 Cutlass/442 with Rally Pack option.

Tunes are greatly improved yet have that factory look with the Custom Autosound Receiver w/ Alpine Speakers.

Along with new wheel cylinders and brake lines, the suspension was upgraded with stainless steel front disc brake conversion, PST polygraphite front end kit w/ heavy duty 1-1/4" front sway bar (bigger than a 442), heavy duty boxed rear control arms w/ 1" rear sway bar and KYB gas shocks.

The front Cutlass grille was replaced with a new '71 442 grille and matching black headlight surrounds that looks great with the black racing stripes.

Has Oldsmobile original style rubber floor mats and full size trunk mat.

Total investment in upgrades alone exceeds $20K (before labor expense) and I have a BIG folder of all the receipts for the new owner.

This show quality Cutlass is always immaculate and only used as a sunny day toy. I have only washed it several times in the last 15 years as it's always kept clean and polished as you see in the pics. You could start your own fan club driving it around as it attracts plenty of positive attention wherever it goes.

Actual mileage on vehicle is now 67.9K but the drive-train (along with all upgrades and Cragar SS wheels w/ BFG radial T/A tires) is under 5K. Runs/drives superbly.

Price is firm as was reduced $1000 for this 'end of season' ad. I don't need to sell and won't unless the selling price is met. This one-of-a-kind Cutlass custom is well worth the investment and will only appreciate in value!

The selling price includes the original 'matching numbers' 350 Rocket engine that has never been rebuilt and is on a stand in my garage and the other original parts (rear-end, steering column, grilles, etc.)

I encourage in-person inspections but no joy rides without me behind the wheel until you own vehicle.

Menu 1

Some content in menu 1.

User Ratings

Condition0 (0)

Rarity9 (1)

Price/Value 0 (0)

Share your own votes

Condtion

Rarity

Prive/Value

Comments 0

You must be a registered user to place comments. Please sign in or register today!

PriceComparison

$1
$13,350
$46,000
Low
Average
High

12% under 5k

26% between 10k and 15k

20% between 15k and 20k

23% between 20k and 25k

16% over 20k

* These values are based off the 235 1971 Cutlasss that have been posted on this site.

SearchCars & Parts

Cars     Forums

AdvertisementSupport

You may also likeSimilar Cars